Таблица перевода единиц измерения давления
| Единицы | бар | мм рт.ст. | мм вод.ст. | атм (физич.) | кгс/м2 | кгс/см2 (технич. атм.) | Па | кПа | Мпа |
|---|---|---|---|---|---|---|---|---|---|
| 1 бар | 1 | 750.064 | 10197,16 | 0.986923 | 10.1972 ∙ 103 | 1,01972 | 105 | 100 | 0.1 |
| 1 мм рт.ст. | 1.33322 ∙10-3 | 1 | 13,5951 | 1.31579 ∙10-3 | 13,5951 | 13.5951 ∙10-3 | 133.322 | 133.322 ∙10-3 | 133.322 ∙10-6 |
| 1 мм вод.ст. | 98.0665 ∙10-6 | 73.5561 ∙ 10 -3 | 1 | 96.7841 ∙10-6 | 1 | 0.1∙10-3 | 9.80665 | 9.80665 ∙10-3 | 9.80665 ∙10-6 |
| 1 атм | 1.01325 | 760 | 10.3323 ∙103 | 1 | 10.3323∙ 103 | 1.03323 | 101.325 ∙ 103 | 101.325 | 101.325 ∙10-3 |
| 1 кгс/м2 | 98,0665 ∙10-6 | 73.5561 ∙ 10 -3 | 1 | 96.7841 ∙10-6 | 1 | 0.1∙10-3 | 9.80665 | 9.80665 ∙10 -3 | 9.80665 ∙10-6 |
| 1 кгс/см2 | 0,980665 | 735.561 | 10000 | 0.967841 | 10000 | 1 | 98.0665 ∙ 103 | 98.0665 | 98.0665 ∙10-3 |
| 1 Па | 10 -5 | 7.50064 ∙10-3 | 0,1019716 | 9.86923 ∙10-6 | 101.972 ∙ 10-3 | 10.1972 ∙10-6 | 1 | 10 -3 | 10 -6 |
| 1 кПа | 0.01 | 7.50064 | 101,9716 | 9.86923 ∙10-3 | 101.972 | 10.1972 ∙10-3 | 103 | 1 | 10 -3 |
| 1 МПа | 10 | 7.50064 ∙103 | 101971,6 | 9.86923 | 101.972 ∙103 | 10.1972 | 106 | 103 | 1 |
К системе СИ относятся: Инженерные единицы:
Бар
1 бар = 0,1 Мпа 1 мм рт.ст. = 13.6 мм вод.ст.
1 бар = 10197.16 кгс/м2 1 мм вод.ст. = 0.0001кгс/см2
1 бар = 10 Н/см2 1 мм вод.ст. = 1 кгс/м2
1 атм = 101.325 ∙ 103 Па
Па
1 Па = 1000МПа
1 МПа = 7500 мм. рт. ст.
1 МПа = 106 Н/м2
SKTB ElPA LLC began manufacturing PDTK-P-MS downhole transducers from Inconel material
SKTB ELPA LLC began to manufacture downhole pressure and temperature transducers PDTK-P-MS downhole from Inconel material
Inconel is a family of austenitic nickel-chromium-based superalloys.
Inconel alloys are oxidation-corrosion-resistant materials well suited for service in extreme environments subjected to pressure and heat. When heated, Inconel forms a thick, stable, passivating oxide layer protecting the surface from further attack. Inconel retains strength over a wide temperature range, attractive for high temperature applications where aluminum and steel would succumb to creep as a result of thermally induced crystal vacancies. Inconel's high temperature strength is developed by solid solution strengthening or precipitation hardening, depending on the alloy.
Inconel alloys are typically used in high temperature applications. Common trade names for Inconel Alloy 625 include: Inconel 625, Chronin 625, Altemp 625, Haynes 625, Nickelvac 625 and Nicrofer 6020.[4] Inconel Alloy 600 include